Take your quad to the next level with the SpeedyBee Adapter 3. With this compact adapter you can easily change your drones flight controller settings on the go via the SpeedyBee app on the go.

Package Includes:

1x Adapter 3

No battery/cables included.

Turn your smartphone intoyour mobile FPV companion

Connect to the SpeedyBee mobile app, and configureyour flight controller anytime, anywhere. Or flash thelatest version of Betaflight/Emuflight/INAV in just2 minutes before your flight session.The choice is yours.

Analyzing Blackbox data has never been easier

No laptop, no separate app, no hassle. Connect your quad to the SpeedyBee mobile app and analyze your Blackbox data* in just 1.5 minutes after a flight. Get the most out of your practice sessions now.

*Currently supports Betaflight and Emuflight only

Your LiPo batteries =Powerful 30W power banks

Connect SpeedyBee Adapter 3 to a LiPo battery andcharge your mobile phone* and tablets when youneed them the most. Supports mainstreamQC3.0/AFC/Apple 2.4A (iPhone 6s and above)and other fast charging protocols with chargingpower up to 30W. Complete with over-currentprotection, short-circuit protection andover temperature protection to protectyour gadgets from unwanted accidents.

Phone Model	Battery Capacity	Battery level after half an hour of charging
Mi 11 Ultra	5000mAh	52%
Samsung S10	3400mAh	49%
HUAWEI P40 Pro	4400mAh	45%
iPhone 11	3110mAh	22%

*Charging function requires 2S LiPo and above.

MicroUSB or Type C?Why not both?

SpeedyBee Adapter 3 comes with a dual-head data cable,with MicroUSB 2.0 and USB 3.0 Type C connectoron each end. No more worries about connectorcompatibility regardless of what flight controlleryou are using in your build.

WiFi + Bluetooth =the best of both worlds

Use Bluetooth for quick access toyour firmware configurator,or switch to Wi-Fi to flash
firmware or downloadBlackbox data at ahigher speed.

Specifications:

Product Name	SpeedyBee Adapter 3
Power Input Voltage Range	1-6S(3.8V+ for 1S)
Power Input Connector	XT60-Male, PH2.0 male
Required Mobile Device System Version	Android 7.0+ \| iOS 12.0+
Supported SpeedyBee App Version	V1.6.1 + for iOS \| V1.5.6+ for Android
Supports Firmware	Configurators and Flashing: Betaflight 3.2.0 and above iNAV 2.0.0 and above EmuFlight 0.1.0 and above Flashing only, excludes Configurators: Ardupilot
Wireless signal transmission frequency	Bluetooth frequency: 2402 – 2480 MHz WiFi frequency: 2412 – 2484 MHz
Maximum Output Current for flight controllers	700mA @5V
Fast Charging Output interface	USB A Port
Minimum Input Voltage for Charging output	7.4V(2S LiPo)
Supported Fast Charging Protocol	QC3.0/QC2.0 AFC FCP SCP/High SCP PE2.0/PE1.1 SFCP
Max Fast Charging Current	3.5A
Max Fast Charging Power	30W
Case Material	ABS + PC
Liquid Silicone Cable Length	12.4cm
Dimension(Main Body)	24.821.853.6mm
Net Weight	35g